General Turning Inserts DCGT Carbide Inserts
|
Length |
Size(mm) |
|||
|
IC |
S |
d |
r |
|
|
7 |
6.35 |
2.38 |
2.8 |
0.05-0.2 |
|
11 |
9.525 |
3.97 |
4.4 |
0.1-0.2 |
Product Information
DCGT turning inserts are 55° inserts featuring 7° positive flank with very positive rake angle and sharp cutting edge. It can combine with different chip breakers and grades for excellent chip-control and high positive geometry. DCGT our major categories which are DCGT11T301. DCGT11T302.DCGT11T304.DCGT150404.The multiple types of dimensions enable to meet different customer requirements and working conditions.it can also customized to meet your requirements.
Specifications
|
Application |
Type |
Ap (mm) |
Fn (mm/rev) |
Grade |
|||||||||||
|
CVD |
PVD |
||||||||||||||
|
VK4215 |
VK4315 |
VK4225 |
VK4325 |
VK4235 |
VK4335 |
VK1005 |
VK1035 |
VK1328 |
VK1505 |
VR1525 |
VR1010 |
||||
|
Small Parts Machining |
DCGT11T301- FS |
0.10-1.50 |
0.02- 0.06 |
• |
O |
O |
|||||||||
|
DCGT11T302- FS |
0.20-2.00 |
0.05- 0.12 |
• |
O |
O |
||||||||||
|
DCGT11T304- FS |
0.20-2.50 |
0.08- 0.25 |
• |
O |
O |
||||||||||
|
DCGT11T308- FS |
0.30-3.00 |
0.10- 0.30 |
• |
O |
O |
||||||||||
• : Recommended Grade
O: Optional Grade
Application
55° diamond shape for turning and milling automobile engine block, cylinder head, transmission parts, gearbox. Index-able inserts with PCD cutting edges are precision cutting tools, which are used in machining of aluminium alloys, copper, brass, non-ferrous materials and high temperature materials. Also we recommend these inserts for finishing steel and stainless-steel materials.
FAQ
1.What is a machining insert?
A wiper insert is an insert used in a milling machine or a lathe. It is designed for finished cutting, to give a smooth surface on the surface being cut. It uses special geometry to give a good finish on the work-piece at a higher-than-normal federate.
2.How to choose correct turning insert?
Select insert geometry based on selected operation, for example finishing.
Select the largest possible nose angle on the insert for strength and economy.
Select the insert size depending on the depth of cut
Select the largest possible nose radius for insert strength.
3.What is the difference between face milling and end milling?
These are two of the most prevalent milling operations, each using different types of cutters – the and mill and the face mill. The difference between end milling and face milling is that an end mill uses both the end and the sides of the cutter, whereas face milling is used for horizontal cutting.
4.Is non-standard products available?
Yes, we accept OEM ODM orders
Hot Tags: cemented carbide inserts, China, suppliers, factory, buy, price, cheap, quotation, free sample
